- Catalog Home
- Exterior Accessories
- Bumper
- Bumper- Rear
Bumper- Rear
- 11-Gauge US Steel Construction
- Retain OEM Receiver Hitch And Wiring
- Pre-Cut Openings To Utilize Factory Sensors
- 100 Pct. Made In The USA
- Ambush Series Rear Bumper
- Smitty Bilt Apollo JL/JT Rear Bumper
- Atlas Rear Bumper
- Frame Cap Style Bumper
- Provide The Best Obstacle Clearance And Departure Angle
- Grade-8 Hardware For Easy Installation
- The Best Ground Clearance And Departure Angle
- Angled Facets To Improve Its Ability To Slide Over The Rocks
- Installation Requires Cutting / Trimming
- A Laser-Cut Steel Template Is Provided
- Includes High Clearance Recovery Shackle Tabs
- Integrates The Existing Receiver Hitch
- Back Up Lights
- Back Up Sensor Holes
- Retains Receiver Hitch And Wiring Locations
- Pipe And Formed Treadplate
- Gloss Black Powder Coat
- Combination Pipe And Tread Plate Construction
- Gloss Black Powder Coat
- Back Up Lights Included
- Pre-Drilled Sensor Holes
- Retains OEM Receiver Hitch And Wiring Locations
- MADE IN THE USA
- Integrated D-Shackle Mounts / Shackles Not Included
- Port To Allow Access To Spare Tire Crank
- Provisions For License Plate Lights And Trailer Light Plug
- Reverse Sensor Mounting Port
- Stylish - Textured Black Powder Coat Replacement For Your Rear Bumper
- Limited Lifetime Warranty On Materials And Construction And A 5 Year Warranty On The Textured Black Finish
- Allowances For Back Up Sensors And Spare Tire Drop Access
- Factory License Plate Lights Can Be Reused To Retain OE Illumination Standards
- Heavy Duty Bumper Is Precision Designed For Accurate Fit And Constructed Of Heavy Duty Steel
- Steel Formed Steps In Corner Step Activities For Extra No Slip Grip
- Steps Provide Additional Point Of Access To The Rear Of Truck Bed Area
- Limited Lifetime Warranty On Materials And Construction And A 5 Year Warranty On The Textured Black Finish
- Provides The Highest Ground And Tire Clearance Possible
- Protects The Flares From Trail Hazards
- Full Width
- Integrated Hitch Receiver
- Recovery Shackle Tabs
- Frame Mounted For Strength Without Stress To Body/Bumper
- Single-Action Opens And Closes w/Jeeps Tailgate
- Compatible w/Crawler™ And Bruiser™ Series Rear Bumpers
- Concealed Heavy Duty Pivot w/Tapered Roller Bearings
- SpyderShell™ Armor Coat Finish w/5-Year Warranty
- Low-Profile Desert Racing Design
- Two Light Mounts that Fit 3 In. Light Pods
- Fits up to a 37 In. Spare Tire
- Tube And Plate Steel Construction
- Paintable Aluminum Accent Panels
- Retains Full Functionality Of Oem Backup Sensors
- Accommodates Factory Tow Hitch
- Bolt-On Installation
- Crawler Rear Bumper
- 100 Percent Made In Texas USA
- Standard Premium 5-Stage Satin Black Powder-Coat Finish
- Has Recessed Light Pods For 2X Rigid SRM Backup Lights
- Has Recessed Light Pods For QuakeLED QQU451
- Special Order Options Include Tire Carrier /Corner Guard Upgrades
- Tubular w/Sheet Metal Design
- Keeps Bumper Weight To a Minimum
- Provides Superior Strength Over OEM Rear Bumper
- Tall Corners Keep The Lines Of The Vehicle
- Black Powder Coated
- Factory hitch must be removed
- Accommodates OEM Back up Sensors
- Mount Kit Sold Separately
- Popular Diamond Tread Design
- Full Size Tongue Weight of 800 lbs. And 8000 lbs. Trailer Weight
- Downsize and Compact Are 350/3500 lb. Weights
- V5 Tested Certified To SAE J684
- Built In Step Pockets For Easy Bed Access
- OE Sensor Compatible
- Flat Black Powder Coat
- Back Up Sensor Holes
- Retain OEM Receiver Hitch And Wiring Locations
- Pipe And Formed Smooth Plate Steel
- Bumper Meets Rear Flares To Create Convenient Step
- Available With Or Without A Tire Carrier
- Stand Up To 408 Hour Salt Spray Testing /Excellent UVU Protection
- Rear Parking Blind Spot Sensor Compatible
- Maintains Factory Receiver
- Provision To Relocate Backup Camera
- Made In The USA
- Paintable
- Back Up Sensor Holes
- Retain OEM Receiver Hitch And Wiring Locations
- Pipe And Formed Smooth Plate Steel
- Bumper Meets Rear Flares To Create Convenient Step
- Available With Or Without A Tire Carrier
- Stand Up To 408 Hour Salt Spray Testing /Excellent UVU Protection
- Rear Parking Blind Spot Sensor Compatible
- Maintains Factory Receiver
- Provision To Relocate Backup Camera
- Made In The USA
- Made In America And Proudly Built In Texas
- 7-Gauge Steel
- .25 in. Mounting Brackets And Internal Bracketry
- Direct Bolt-On Design
- Sensor Compatible
- Integrated 8 in. Accent LED Light
- 3 in. Cube Light Mounts
- Corner Step
- Integrated Blind Spot
- Bolt-On Steel Step Plates
- Textured Satin Black Powder Coat
- Lifetime Structural Warranty
- Higher Than Factory Ground Clearance
- 3.5 mm Steel Plates w/ 5 mm. Steel Supports
- Micro-Texture Black Powder Coat Finish
- Dual Clevis Mounts for 3/4 in. D-Ring Shackles
- Retains Factory Backup Sensors
- Jeep Mid-Width Rear Bumper
- Mounts For 3 in. Light Pods
- 1 in. Thick D-Ring Mounts
- Compatible With Factory Hitch
- Fits Up To 37 in. Spare Tire / Max 4.5 in. Backspacing Wheels
- Welded Zip-Tie Tabs For Clean Wire Management
- Micro-Texture Black Powder Coat
- Paintable Aluminum Accent Panels
- Fully Bolt-On Installation
- Protects Vehicle From Damage Against Wildlife And Road Debris
- Provides Added Safety To Driver And Vehicle
- Heavy Duty Diamond Plate Steel
- Honeycomb Mesh Protects Grille/Gives Maximum Airflow
- 1.5 in. Headlight Protection Tubes
- 2 in. Full Wraparound Wings Ties Into Bumper
- Provisions For Factory Parking Sensors
- 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts
- Compatible For Factory Fog Lamps Or LED Post Mount Lights
- Custom Die Cast Riveted Logo Badge
- Mounting Provisions For License Plate
- Hardware Mounting Brackets Included
- Integrated Steps On Either Side Of The Tailgate
- Durable Formed 3/16in. Steel Construction
- Retain OEM Receiver Hitch And Wiring Locations
- 3/4in. D-Ring Recovery Points
- 2 Stage Black Powder Coat
- Identity Jeep Rear Bumper
- iDentity Bumper Components
- Truly Modular Design For Customization
- Optional Shackle Or Non-Shackle Mount End Pods Available
- Avail. Mesh And Trim Ring Inserts w/Integrated Parking Sensors
- Integrated 8 in. Accent Led Lighting w/Preparatory Control Module
- Accommodates w/Factory Hitch And Tow Point
- Allows For Multitude Of Rear Facing Light Options
- Constructed From High Quality Steel
- Made In USA
- Identity Rear Bumper Shackle End Pods
- Direct Fit
- Manufactured From 3/16 and 1/4 Cold Roll Steel
- Solid Mount D-Rings Welded On The Inside And Out
- Two Stage Matte Black Finish Powder Coat Finish - 5 Year Limited Warranty
- Smittybilt Advantage Warranty
- M1A2 Modular Rear Bumper For 14-18 Chevy Silverado
- 2 Clevis Mounts That Take 3/4 In. D-Rings
- Includes Paintable Aluminum Inserts
- Utility Steps Located On Each Corner For Easier Bed Access
- Parking Sensors Are Retained
- Gusseted Construction For Strength
- Direct Fit Bolt-On Installation
- OEM Style Steel Rear Bumper
- Mount Kit Included
- 2 In. Diameter Tube Frame
- Optional Class III/IV Hitch Available. Sold Separately
- Retractable License Plate Holder Conceals Receiver Hitch
- Equipped With Mount Points For Optional Auxiliary Lights
- Available For Vehicles With Or Without Backup Sensors
- Bolt-On Installation; No Drilling Required
- Truck Pal; Tailgate Ladder
- Complete Assembly
- Molded Polymer Step Pads
- V5 certified
- Interchangeable Components
- 3 Year Warranty
- Integrates With Existing Receiver Hitch
- Formed Steel Durability
- Gains Lower Steps And Recovery Points
- Stylish And Functional
- Integrates With Existing Receiver Hitch
- Formed Steel Durability
- Gains Lower Steps And Recovery Points
- Stylish And Functional
- Increases Ground Clearance And Angle Of Approach
- Constructed Of 10 Gauge Steel For Strength And Style
- Compatible For Blind Spot Monitors And Parking Sensors
- Accommodate For Oem Hitch And Led Back Up Lights
- Configured To Accept 2 Fm6 Led Flush Mount
- Custom Laser-Cut Westin Logo
- Hardware And Mounting Brackets Included
- Bolt-On Installation - No Drilling Required
- Rear Bumper
- 3/16 Inch Steel Plate Construction
- Bolt On Installation Includes Hardware
- Dual Shackle Plates For D-Rings Tie To Frame Rails
- License Plate Pocket Reuse OEM Lights
- Dual Process Black Powder Coat Finish
- Retain OEM Tow Hitch
- Can Mount TN-5293 Swing Arm Tire Carrier
- 3/16 in. Cold Rolled Steel Plate Construction
- Dual Shackle Plates Tie To Frame Brackets
- Will Allow For TC 5293 Swing Arm
- Stronger Then OEM Bumper
- Dual Process Black Powder Coat Finish
- Easy At Home Installation With Only Hand Tools
- Return OEM Tow Hitch
- Rear Bumper
- 1/4 in. And 3/16 in. Steel Construction
- 2 Stage Powder Coat Finish
- DV8 No Hassle Warranty
- Lights Included
- Aggressive Styling
- Integrated Tow Hooks And D-Ring Mounts
- Double Rung Side Step
- Fab Fours Signature Knife Edge Design
- Ease Of Installation
- Includes 16 Gauge Removable Skin
- Sensor Compatible
- 2 Integrated Pod Mounts For Reverse Lights
- Stainless Steel Hardware
- 2 Stage Matte Black Powder Coat
- 11 Gauge Steel Construction
- MADE IN THE USA
- Direct Fit
- 2 And 4-Door Models
- Textured Black
- One-Piece Design
- Robotically Welded For Extreme Durability
- Pre-Cut Vertical Uprights For A Signature Look
- No Hitch
- 5 Year Limited Warranty
- Rear Bumper Kit
- Rear Bumper Light With Fog Light
- 3/16 in. Steel Plate
- Bumper Step For JT-2965
- Bolt-On Design
- Uses Factory Frame Mounting Holes For Extra Support
- Optional Bed Protector JT-5101
- Two-Stage Light Texture Finish In Black
- 3 Year Finish/Limited Lifetime Warranty
- Rear Bumper Step Pad
- Slim Design
- Textured 3 Stage Powdercoat
- Solid Steel Construction
- Light Weight
- Bolt On Installation
- Standard Dv8 Warranty
- Aluminum Vents Can Be Color Keyed To The Jeep
- Rear Steel Bumper
- Aggressive Design
- Winch Ready- Will Hold Up To 16.5K Winch (Depends On Vehicle)
- Perfectly Follows The Body Lines
- Side Mounting Slots And Tabs For Various Light Options
- Provides Far More Tire Clearance
- Integrated Shackle Mounts
- With Receiver
- No D-Ring Mounts
- Maximize Performance On The Toughest Trails
- Multi-Faceted Bumper Design
- Plate Steel Bumper Construction
- Recessed Back-Up Lamps
- Integrated Hitch Receiver
- Rock Solid Mounting
- Recovery Shackle Tabs
- Multi-Faceted Design
- Recessed Back-Up Lamps
- Works w/Existing Equipment
- Rock Solid Mounting
- Allows For 3X3 Surface Mount Lights
- LED Lights Not Included
- CNC Laser Cut And Formed 3/16 in. Thick Steel Fully Welded Hand Finished Seams
- Compatible With OEM Factory Receiver Hitch
- Easy Install-No Drilling Or Cutting Required
- Finished Welded Assembly Is Zinc Plated Then Top Coated With Go Rhino Signature Black Textured Powder Coat
- Full Width Bumper With Center Drop Step
- Fully Welded 1 in. Thick Dual Function Patented Rhino Hooks With Shackle Mount For Up To 7/8 in. D-Ring Pin
- Grade 8 Mounting Fasteners Coated In Geomet Black For Superior Strength And Corrosion Resistance
- Integrated Fully Welded Center Drop Step
- Signature Hex Mesh Cover Can Be Used With Or With Out Lights To Finish The Overall Look Or Simply Protect The LEDs
- Tire Carrier NOT Included / Plastic Bumpers w/Sensors Require Additional Parts
- Limited Lifetime Warranty On Materials And Construction And A 5 Year Warranty On The Textured Black Finish
- CNC Laser Cut And Formed 3/16 in. Thick Steel Fully Welded Hand Finished Seams
- Compatible With Factory Hitch Receiver
- Easy Installation / No Drilling Or Cutting Required
- Finished Welded Assembly Is Zinc Plated Then Top Coated With Go Rhino Signature Black Textured Powder Coat
- Fully Welded 1 in. Thick Dual Function Patented Rhino Hooks With Shackle Mount For Up To 7/8 in. D-Ring Pin
- Grade 8 Mounting Fasteners Coated In Geomet Black For Superior Strength And Corrosion Resistance
- Integrated Standard 3 in. LED Cube Mounting Plates
- Overall Stubby Width Allows For Enhanced Tire Clearance
- Signature Hex Mesh Cover Can Be Used With Or With Out Lights To Finish The Overall Look Or Simply Protect The LEDs
- Tire Carrier NOT Included
- Plastic Bumpers w/Sensors Require Additional Parts
- 11-Gauge Main Body
- 7-Gauge Bracketry
- Louvered Recesses For Reduced Drag
- Sensor Compatible
- Direct Bolt On Application
- Block Off Plate w/Stainless Hardware For No Lighting Option
- High Clearance Bumper
- Formed To Fit The Contours Of Vehicle
- CNC Laser Cut
- Made In America
- Spartan Rear Bumper
- Direct Fit That Enhances Factory Styling
- Compatible With Factory Hitch
- Features Welded-In Zip Tie Tabs For Clean Wire Management
- Fully Bolt-On Design That Doesnt Require Modification Or Drilling
- Aluminum Backed Logo
- Mounts 3 in. Light Pods
- Features 1 in. Thick D-Ring Mounts That Accept A 7/8 in. Pin
- Up To A 37 in. Spare Tire Will Fit Above The Bumper On The OEM Carrier
- Compatible With All Trim Levels
- Micro-Texture Black Powder Coat
- Satin Black Accent Panel
- All Mounting Hardware Is Included
- Easy Access To Factory Tow Hitch
- No Drill Installation
- Black Powder Coated
- Accommodates Factory Park Assist Sensors
- Raised corners for better entry and exit under the most extreme conditions
- Accommodates 3X3 Cube Led Lights
- Integrated 3/4 in. D-Ring Mounts
- Class Iii Receiver Hitch
- Integrated Jack Points
- Perfect Mid Width Design
- Direct Fit
- Two Stage Textured Black Powder Coat Finish
- Dense Zinc Treated Undercoating
- Expertly Robotically Welded
- Bumpers
- New solid D-ring and jack point mount - welded on the inside and out!
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- UHMW ;ultra-high-molecular-weight polyethylene to provide the ultimate protection for rock crawling
- Aux back up light cut out provided
- 3/16-inch cold rolled steel with two-stage textured matte black finish
- Powder coat finish 5 year limited warranty
- Smittybilt limited lifetime warranty
- Modular design; tire carrier can be added in the future.
- Class III hitch for true towing with towable d-ring
- Direct Fit
- Black Powder Coat
- Dense Zinc Treated Undercoating
- Two Stage Textured Black Powder Coat Finish
- Expertly Robotically Welded
- Bumpers Bolt Directly To Your Vehicle
- Bumper Is 2 in. X .120 in. Wall
- 2 in. Receiver Rated Class III 9;000 LBS.
- Standard Rear Bumper
- Made In American And Texas Strong USA
- 3/16 in. Heavy Duty Steel Construction
- 1/4 in. Gusseting And Internal Bracketry
- CNC Laser Cut
- Precision Brake Formed
- Welded By Craftsmen Inside And Out
- Direct Bolt On Design
- Includes License Plate Lights
- Light Ports For Led Backup Lights
- Standard Premium 5-Stage Satin Black Powder-Coat Finish
- Made In American And Texas Strong USA
- 3/16 in. Heavy Duty Steel Construction
- 1/4 in. Gusseting And Internal Bracketry
- CNC Laser Cut
- Precision Brake Formed
- Welded By Craftsmen Inside And Out
- Direct Bolt On Design
- Includes License Plate Lights
- Light Ports For Led Backup Lights
- Standard Premium 5-Stage Satin Black Powder-Coat Finish
- Made In Texas USA
- 3/16 in. Heavy Duty Steel Construction
- 1/4 in. Gusseting And Internal Bracketry
- CNC Laser Cut
- Precision Brake Formed
- Welded By Craftsmen Inside And Out
- Direct Bolt On Design
- Includes License Plate Lights
- Light Ports For Led Backup Lights
- Standard Premium 5-Stage Satin Black Powder-Coat Finish
- Made In American And Texas Strong USA
- 3/16 in. Heavy Duty Steel Construction
- 1/4 in. Gusseting And Internal Bracketry
- CNC Laser Cut
- Precision Brake Formed
- Welded By Craftsmen Inside And Out
- Direct Bolt On Design
- Superior Foot Forward Winch Mount Fits WARN M8000 Or 9.5XP
- Includes License Plate Lights
- Light Ports For Led Backup Lights
- Standard Premium 5-Stage Satin Black Powder-Coat Finish
- Not Vehicle Specific
- 3mm Deep Drawn Formed Steel
- Winch Compatible Up To 12K
- Includes Modular Wings With Light Provisions
- Integrated D-Ring and Lift Points
- Oe Fog Light Provision
- Integrated Overrider With 13 in. Lightbar Provision
- Cold Rolled Brite Steel
- OE Style Steel Step Plate
- Molded Polymer Surface
- Mount Kit Sold Separately
- 3 Year Warranty
- Allows For 2.5 X 2 Flush Mount Lights
- 1 in. Thick Steel Shackle Mounts With Patented Signature Rhino Horn Tow Hook
- Plastic Bumpers W/ Sensors Require Additional Parts
- Center Step Area For Enhanced Vehicle Access And To Allow Use Of Larger Spare Tires
- Compatible With Factory Hitch
- Full Featured Rear Bumper Installs Quickly And Easily
- Full Width Bumper Features Wide Corner End Caps
- Wide Corners Provide Safe Step Area When Accessing Roof Racks-Perfect For Overlanding And Camping
- Limited Lifetime Warranty On Materials And Construction And A 5 Year Warranty On The Textured Black Finish
- Allows For 2X6 Flush Mount Lights
- 1 in. Thick Steel Shackle Mounts With Patented Signature Rhino Horn Tow Hook
- Plastic Bumpers W/ Sensors Require Additional Parts
- Center Step Area For Enhanced Vehicle Access And To Allow Use Of Larger Spare Tires
- Compatible With Factory Hitch
- Straight Style Mid Width Bumper Installs Quickly And Easily
- Limited Lifetime Warranty On Materials And Construction And A 5 Year Warranty On The Textured Black Finish
- Allows For 2X6 Flush Mount Lights
- 1 in. Thick Steel Shackle Mounts With Patented Signature Rhino Horn Tow Hook
- Plastic Bumpers W/ Sensors Require Additional Parts
- Center Step Area For Enhanced Vehicle Access And To Allow Use Of Larger Spare Tires
- Compatible With Factory Hitch
- Perfect For Off-Road And High Clearance Use
- Stubby Style Maximum Clearance Bumper Installs Quickly And Easily
- Limited Lifetime Warranty On Materials And Construction And A 5 Year Warranty On The Textured Black Finish
- Made In American And Texas Strong USA
- Schedule 40 Pipe For Center Structure
- 11 Gauge Shell w/1/4 in. Heavy Duty Mounting System
- CNC Laser Cut
- Precision Brake Formed
- Welded By Craftsmen Inside And Out
- Direct Bolt On Design
- Recessed Light Ports For Flush Or Surface Mount Led Cubes
- Mounting Holes For License Plate
- Standard Premium 5-Stage Satin Black Powder-Coat Finish
- Made In America And Proudly Built In Texas
- 11-Gauge Steel
- 1/4 in. Internal Bracketry
- Schedule 40 Pipe
- Direct Bolt-On Design
- Recessed Light Ports For Flush Or Surface Mount Led Cubes
- Sensor Compatible
- Textured Satin Black Powder Coat
- Lifetime Structural Warranty
- Superior Strength And Styling
- Give Your Vehicle That Extra Cool Factor
- Two Front Side Openings Allow Light Options
- Sensor Compatible
- 11 Gauge US Steel
- RotoPax Mount
- 3/16-Inch Plate Steel Construction
- Designed To Work With Factory Or Westin Hitches
- Integrated Recovery Shackle Mount Points
- Auxiliary Light Mount Points
- Rock Light Mount Points
- 2 Off-Road Jack Points
- No Drilling Required - Bolt On Installation
- Includes Bumper; Mounting Hardware And Install Instructions
- Bolt-on design for XRC GEN2 bumpers
- Frame pivot point for added strength
- Tuned one-handed opening operation; tuned to factory tailgate
- CB and jack mounts and Roto Pax® gas can holder
- Manufactured from 3/16 in. cold rolled steel
- Two-stage textured matte black finish
- 18-Current Wrangler JL; 2-4 Door
- Adjustable Slant Tire Carrier
- Convertible Rotopax Mount Can Be Installed In Either Straight Or Slant Tire Configurations
- Included Adjustable 3rd Brake Light Bracket
- Retains OE Camera Location And Functionality
- Removable Trail Jack And Aerial Antenna Mount
- Steel Vent Cover
- Roller Bearing Pivot
- Fits Up To 40 in. Tire; With Single-Action Open And Close Feature
- Direct Fit
- 2 And 4-Door Models
- Two Stage Matte Black Textured Powder Coat Finish
- High strength lightweight design
- Low Profile Winch Mount Improves Air Flow
- Integrated lightweight 10-gauge steel shell 4-gauge steel winch tray provides superior strength at an affordable price
- Features 4.5 x 10 in. winch mount pattern
- Accommodates Most Winches Up To 12000 lbs Capacity